Widely used for drying high-end materials in the pharmaceutical, fine chemicals, food, and health supplement industries.
Fully Automatic Control
Gentle Stirring
Energy-Efficient and High-Performance
Sealed and Clean
This equipment employs a combined orbital and rotational drive system. The rotating arm is equipped with a screw agitator, which creates an effective mixing flow within the tank to achieve efficient mixing and vacuum drying. The equipment operates in a fully enclosed, negative-pressure environment and, when combined with a vacuum condensation system, enables complete solvent recovery. Drying efficiency is 2.5 times higher than that of traditional equipment, while energy consumption is reduced by more than 50%.
The wet material enters the tank, where heat exchange occurs through the jacket to provide a heat source for the drying process. The material undergoes both horizontal mixing and vertical circulation, creating an effective mixed flow that ultimately achieves the dual process objectives of mixing and drying.
A sampling valve with a patented special design that enables online sampling under sealed vacuum conditions.
This internally heated ball valve, featuring a pneumatic bladder seal and protected by a patent, enables flow control, in-place cleaning, and backflushing, and complies with GMP and FDA clean manufacturing requirements.
It combines mixing, drying, and discharge into a single unit, streamlining the process, simplifying operation, and delivering high overall efficiency.
It contains an in-line spray ball that covers the entire inner surface of the equipment, enabling in-line cleaning.
This equipment is widely used for drying materials of various densities, particularly loose materials, free-flowing materials, crystals, and granular materials in the pharmaceutical, chemical, food, and new materials industries.
Chemical Industry
Pharmaceutical Industry
Food Industry
New Materials Industry
Equipped with two independent drive systems for orbital and rotational motion, along with two independent mechanical seal assemblies, the unit ensures stable and reliable mixing operation and prevents foreign objects from entering the material.
The tank features a fully conical design with a small cone angle, an all-welded structure without container flanges, and no dead corners for easy cleaning. It can also be disassembled in sections for convenient maintenance.
Equipped with multi-core fabric bag or multi-layer sintered mesh collectors, featuring heated cleaning and reverse-blow functions, these collectors are resistant to clogging and effectively reduce vacuum loss.
This pneumatic-sealed ball valve supports opening adjustment, online cleaning, and backflushing functions, ensuring thorough and complete discharge with no solid material residue.
Featuring a reliable bottomless bearing stirring drive mechanism, combined with a specially designed sampling valve, it enables online sampling under sealed vacuum conditions, thereby eliminating cross-contamination.
As the unit rotates on its own axis, it draws material from the bottom of the tank and circulates it upward; at the same time, the rotating arm performs a radial circular motion. The material is mixed in the horizontal plane and circulates in the vertical plane, creating an effective mixing effect.
Custom Materials
Surface Finishes
Upgraded Configurations
| Model | Total Volume (L) | Effective Volume (L) | Specification (mm) | Lug Center Distance × Overall Height |
|---|---|---|---|---|
| DLG-500 | 1000 | 500 | DN1300 | φ1650×3200 |
| DLG-750 | 1650 | 750 | DN1500 | φ1850×3600 |
| DLG-1000 | 2400 | 1000 | DN1700 | φ2050×4000 |
| DLG-1500 | 3300 | 1500 | DN1900 | φ2300×4500 |
| DLG-2000 | 4500 | 2000 | DN2100 | φ2500×5000 |
| DLG-3000 | 6000 | 3000 | DN2300 | φ2700×5500 |
| DLG-4000 | 8000 | 4000 | DN2500 | φ2900×5900 |
| DLG-5000 | 10000 | 5000 | DN2700 | φ3100×6300 |
Note: Custom design and manufacturing are available according to users' special requirements, such as material, structure, specification and dimension.
