The equipment offers advantages such as high filtration precision, a large filtration area, low pressure drop, and a long service life. This filter is available in two types: jacketed and non-jacketed. The microporous tubes are made of PE (polyethylene), PA (polyamide), titanium, or sintered stainless steel; they are resistant to acids, alkalis, salts, and most organic solvents, and are non-toxic with no leaching of foreign substances.
Ultra-High Filtration Precision
High-Efficiency Regeneration
Chemical Resistance
High Stability and Durability
Easy to Clean/Replace
PE/PA microporous precision filters offer the advantages of a small footprint, simple operation, low labor intensity, and a long service life. Comprising a housing, tube sheet, and filter rods, they deliver superior performance, including high filtration efficiency, efficient filter cake drainage, high regeneration efficiency, and resistance to chemical corrosion.
The minimum filtration precision for liquid-solid filtration is 0.45 μm, and for gas-solid filtration, it is 0.3 μm; the filtration efficiency reaches 99.9%, and the filtration pressure drop is low.
Using the rapid compressed-gas backflush method, the filter cake adhering to the outer surface of the microporous tube can be quickly and safely removed with minimal effort.
Clogged microporous tubes can be efficiently regenerated using the rapid gas-liquid backflushing method; after a period of use, chemical regeneration can be employed to extend the service life of the filter tubes.
An optional jacket design is available to heat or cool the material and maintain the filtration temperature.
Fully sealed cylinder to prevent solvent evaporation or material contamination.
It is widely used in the pharmaceutical, chemical, metallurgical, and electroplating industries, among others.
Chemical Industry
Pharmaceutical Industry
Electroplating Industry
Environmental Protection Industry
Sealed cylinder, available in materials such as stainless steel; may be equipped with a jacket
Sintered tubes made of PE, PA, titanium, or stainless steel for precision filtration
Supports the filter rod to prevent deformation
Custom Materials
Surface Finishes
Upgraded Configurations
Control Systems
| Model | Filter Area (m²) | Cylinder Diameter (mm) | Cylinder Height (mm) | Overall Height (mm) | Sludge Discharge Port Diameter (mm) |
|---|---|---|---|---|---|
| PE/PA-2 | 2 | 300 | 1000 | 1850 | 150 |
| PE/PA-3 | 3 | 400 | 1000 | 1950 | 200 |
| PE/PA-5 | 5 | 500 | 1000 | 2000 | 250 |
| PE/PA-8 | 8 | 650 | 1000 | 2100 | 300 |
| PE/PA-20 | 20 | 900 | 1500 | 3300 | 400 |
Note: Custom design and manufacturing are available according to customers' special requirements such as material, structure, dimension specifications, etc.
